Active poe switch with 802.3af/at compliant POE switches support poe devices and non-poe devices, But when connecting passive poe device or non-poe device,the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter.
8 gigabit poe switch@120W PoE switch with 8 1000M PoE port + 2 1000M Uplink port,8×PoE ports providing up to 30W per port, total PoE budget 120W. 2 gigabit ethernet Uplink Port for connecting NVR and Internet , etc..
4KV Lightning Protection PoE switch have professional lightning protection design-up 4KV port and power supply thunder prevents, with two levels of protection design respectively, effectively restrain the power of lightning from cable, which equivalent to give the entire network monitoring system with a security fence.
AI PD DetectionThe poe port will intelligently judge whether the device connected to the port needs power supply. If it is a non-poe device that does not need power supply, the switch will not supply power to these devices and will not damage the device.
Built-in power supply The power supply is located in the poe switch body and integrated with the switch. It is simple and light. After connecting to our AC Power Cable, the switch can transmit power to the equipment connected to the switch.
Fanless design The fanless design makes poe switch work without any noise.
Network cable short-circuit protection mechanism POE switch is stable and has strong anti-interference ability, protect the fault caused by the short circuit of the network port.Short Circuit, Over Current and Over Voltage Protection.
Damage to one port does not affect other ports
When a port in the poe port is damaged and cannot work normally, other ports will not be affected and can still work normally.
Normal work under water
When the damaged network cable encounters water, it will not be short-circuited. It will not cause the equipment to fail to work normally. The switch can maintain normal work stably and has strong anti-interference ability.
Make crystal head
When the power is on, you can use a tool to cut the network cable and make a new registered jack, and then it can work normally.
Supported devices
support active poe devices&passive poe devices&non poe devices
The POE switch is an active POE switch, as shown in the figure, it supports active poe devices, and it can work when connected to your device. It also supports passive poe devices and non-poe devices, But please note: If your device is a passive Poe device or a non-Poe device, the switch can only transmit data and cannot power your device,so the connected device needs to be separately powered. Or you can use it with active poe splitter.