What KuWFi CPF905 is:- A outdoor 4G LTE CPE router designed for WIFI users to get access to internet via UMTS/HSPA/LTE. It is used to supply internet access to indoor &outdoor WiFi coverage and monitor camera project(it can convert 4G to WiFi hotspot)use for indoor or outdoor without broadband place, let you enjoy smooth internet while working from home/working online /telecommuting. can be connected to 10 devices at the same time.
4G network band:- This 4G LTE Router is compatible with the frequency bands of SIM cards in most European countries. Frequency Bands: FDD:B1,B3,B5,B7,B8,B20;TDD:B38,B39,B40,B41;WCDMA:B1,B5,B8;WCDMA:B1,B5 ,B8;EVDO BC0;GSM:900/1800MhZ. Please you confirm whether your SIM card frequency band is compatible with it before buying a router. Unlocked mean work with any sim card but the sim card network Frequency band should be support the router network band.
Main feature Performance:- KuWFi CPF905 LTE CAT4 up to 150Mbps IP66 Waterproof and the wireless transmission speed rate is 300mbps. Come with 12V 1A Power Supply and work with 10 Users. including 1* WAN/LAN port and one sim card slot,Ethernet mode :dynamic/PPPOE/LAN. It is suitable for installation in home/office/factory/warehouse/garden/ parking lot . Dual high gained external antenna one is 4G antenna and one is WiFi antenna (support remove and change other antenna).
HOW TO USE:- insert SIM card then power on the router, Even if your SIM card is compatible with the product, it is not necessarily plug and play, you may need to disable the PIN code of the SIM card and modify the APN .Enter the router IP address: 192.168.199.1 and Click Network—APN—Enable. Modify APN. You can find the APN of the SIM card from the carrier's official website or mobile phone. Make sure the SIM card is activate, Not support roaming service and Virtual SIM Card and IoT SIM Card.